2019天天爱天天做

<del id="uhv9v"><small id="uhv9v"><optgroup id="uhv9v"></optgroup></small></del>

<tr id="uhv9v"></tr>
<code id="uhv9v"><nobr id="uhv9v"><track id="uhv9v"></track></nobr></code>
  • <tr id="uhv9v"><sup id="uhv9v"></sup></tr>
    <center id="uhv9v"><em id="uhv9v"></em></center>

      Products

      Products

      GM-3 friction lining

      GM-3 friction lining

      As one of the main components of friction lining for multi rope friction hoist, early applied to multi rope friction hoist. friction lining are mainly polyvinyl chloride (PVC) and polyurethane (CPUR), polyvinyl chloride (PVC) friction liner friction coefficient (0.20) and wear resistance are poor, polyurethane (CPUR) friction lining increase in wear resistance, but the friction coefficient is still in 0.2-0.23, and because of poor processing performance, Rope groove was difficult, because of the process factors of rope groove, so that the quality is not stable. melting phenomenon will cone in the using, therefore, polyurethane (CPUR) friction lining also can be used only in the range of friction the coefficient of 0.22. In our country, multi rope friction hoist of friction coefficient of more than 0.25 is imported from abroad, but the price is expensive and the import cycle is long.

       

      Comparison between GM-3 friction liner and K25  friction liner equal power abrasion test

      Sample No.

      Try

      before

      weight(g)

      Try

      after

      weight(g)

       

      Abrasion

      (g)

      Total

      Abrasion

      (g)

      Volume

      (cm2)

      Equal

      power

      abrasion

      (10-6cm3/KN.m)

       

      K25

      1#

      549.70

        549.23

        0.47

      0.75

      0.481

      5.29

      2#

      548.12

        547.84

        0.28

      GM-3

      1#

      513.44

        513.15

        0.29

      0.56

      0.412

      5.29

      2#

      523.22

        522.95

        0.27

       

      Luoyang mining machinery plant in 1997 years began to develop the GM-3 high performance friction lining, and passed technical appraisal in Sep. 12, 2001 by the provincial and ministerial level .

      Friction liner is the key part of the multi-rope friction hoist. Its property of using directly affects the property parameters, the hoisting capacity and the safety reliability of the hoist.

      Friction liner material experienced the process of polyvinyl chloride, polyurethane, polyurethane, and thermosetting materials. The first three materials designed the friction coefficient in 0.2 ~ 0.23, the last material’s friction coefficient is more than 0.25 ( high friction liner). 

      High friction liner is divided into domestic high friction, imported materials to suppress high friction, pure imported high friction three. The users can choose at will according to their needs. Tower hoist liner is a rope groove, floor type hoist liner two rope grooves, mainly for the convenience of turning rope groove. In return, they also improved the liner service life and the usage rate of liner material. The friction liner is fixed on the friction wheel by fixed block and pressing block through bolts.

      GM-3 friction liner Mechanical properties

         No.

      Item

      Unit

      Measure

      results

      Remarks

         1

      density

      g/cm3

      1.36

       

         2

      hardness

      HD

      70-74

      GB/T2411

         3

      impact strength

      KJ/M2

      9.72

      GB1843

         4

      tensile strength

      Mpa

      19.10

      GB1040

         5

      Bending strength

      Mpa

      26.22

      GB9341

         6

      Flexural modulus

      Mpa

      920

      GB9341

         7

      elongation at break

      %

      10.6

      GB1040

         8

      compressive strength

      Mpa

      45.6

      GB1041

         9

        thermal decomposition temperature

      320

       

      Next:Cable hook
      2019天天爱天天做
      <del id="uhv9v"><small id="uhv9v"><optgroup id="uhv9v"></optgroup></small></del>

      <tr id="uhv9v"></tr>
      <code id="uhv9v"><nobr id="uhv9v"><track id="uhv9v"></track></nobr></code>
    1. <tr id="uhv9v"><sup id="uhv9v"></sup></tr>
      <center id="uhv9v"><em id="uhv9v"></em></center>